Citation: | ZHANG Rui, FENG Ya, YANG Shuo. An Equivalent Micropolar Beam Method for Grid Sandwich Structures Under Inhomogeneous Temperature Conditions[J]. Applied Mathematics and Mechanics, 2018, 39(6): 672-680. doi: 10.21656/1000-0887.390086 |
[1] |
范绪箕. 高速飞行器热结构分析与应用[M]. 北京: 国防工业出版社, 2009.(FAN Zhuqi. Thermal Structures Analysis and Applications of Highspeed Vehicles [M]. Beijing: National Defend Industry Press, 2009.(in Chinese))
|
[2] |
KO W L. Heat shielding characteristics and thermostructural performance of a superalloy honeycomb sandwich thermal protection system (TPS): NASA/TP-2004-212024[R]. 2004.
|
[3] |
马玉娥. 可重复使用运载器热防护系统热/力耦合数值计算研究[D]. 博士学位论文. 西安: 西北工业大学, 2005.(MA Yu’e. Study of thermo-mechanical coupled computation for thermal protection system of reusable launch vehicle[D]. PhD Thesis. Xi’an: Northwestern Polytechnical University, 2005.(in Chinese))
|
[4] |
唐羽烨, 薛明德. 蜂窝夹芯板的热学与力学特性分析[J]. 复合材料学报, 2005,22(2): 130-136.(TANG Yuye, XUE Mingde. Thermo-mechanical characteristics analysis of sandwich panel with honeycomb core[J]. Acta Materice Compositae Sinica,2005,22(2): 130-136.(in Chinese))
|
[5] |
刘振祺, 梁伟, 杨嘉陵, 等. MTPS蜂窝夹芯结构传热性能及热应力分析[J]. 航空学报, 2009,30(1): 86-91.(LIU Zhenqi, LIANG Wei, YANG Jialing, et al. Analysis of thermal and mechanical properties of honeycomb structure of MTPS[J]. Acta Aeronautic et Astronautica Sinica,2009,30(1): 86-91.(in Chinese))
|
[6] |
李红. 高超声速飞行器金属蜂窝夹芯结构的热机耦合行为分析[D]. 硕士学位论文. 哈尔滨: 哈尔滨工程大学, 2011.(LI Hong. Research on thermo-mechanical-coupled properties of metallic honeycomb structure of high-speed vehicle[D]. Master Thesis. Harbin: Harbin Engineering University, 2011.(in Chinese))
|
[7] |
张锐, 尚新春. 格栅夹层梁的热弯曲变形[J]. 复合材料学报, 2014,31(6): 1558-1565.(ZHANG Rui, SHANG Xinchun. Thermal bending deformation of grid sandwich beam[J]. Acta Materiae Compositae Sinica,2014,31(6): 1558-1565.(in Chinese))
|
[8] |
张锐, 尚新春. 考虑腹板弯曲的一维格栅夹层结构热变形[J]. 北京理工大学学报, 2015,35(4): 331-335.(ZHANG Rui, SHANG Xinchun. Thermal deformation of the sandwich structure with 1-D grid considering the bending of the webs[J]. Transactions of Beijing Institute of Technology,2015,35(4): 331-335.(in Chinese))
|
[9] |
NOORA K, MALIK M. An assessment of five modeling approaches for thermo-mechanical stress analysis of laminated composite panels[J]. Computational Mechanics,2000,25(1): 43-58.
|
[10] |
中国科学院, 北京力学研究所, 固体力学研究室板壳组. 夹层板壳的弯曲、稳定和振动[M]. 北京: 科学出版社, 1977.(Plate and Shell Group, Laboratory of Solid Mechanics, Institute of Mechanics, Chinese Academy of Sciences. Bending, Stability and Vibration of Sandwich Plates and Shells [M]. Beijing: Science Press, 1977.(in Chinese))
|
[11] |
SAVOIA M, REDDY J N. Three-dimensional thermal analysis of laminated composite plates[J]. International Journal of Solids and Structures,1995,32(5): 593-608.
|
[12] |
NOOR A K, NEMETH M P. Micropolar beam models for lattice grids with rigid joints[J]. Computer Methods in Applied Mechanics and Engineering,1980,21(2): 249-263.
|
[13] |
IESAN D. Thermal effects in chiral elastic rods[J]. International Journal of Thermal Sciences,2010,49(9): 1593-1599.
|
[14] |
张锐, 尚新春. 格栅夹层梁热弯曲的等效微极热弹性分析[J]. 应用数学和力学, 2015,36(9): 936-944.(ZHANG Rui, SHANG Xinchun. Equivalent micropolar thermoelastic analysis of thermal bending for grid sandwich beams[J]. Applied Mathematics and Mechanics,2015,36(9): 936-944.(in Chinese))
|
[15] |
易斯男, 程耿东, 徐亮. 一维周期性梁结构等效性能计算方法讨论[J]. 计算力学学报, 2016,33(5): 704-710.(YI Sinan, CHENG Gengdong, XU Liang. Discussion of effective properties prediction methods for 1D periodic beam structure[J]. Chinese Journal of Computational Mechanics,2016,33(5): 704-710.(in Chinese))
|
[16] |
GESUALDO A, IANNUZZO A, PENTA F, et al. Homogenization of a Vierendeel girder with elastic joints into an equivalent polar beam[J]. Journal of Mechanics of Materials & Structures,2017,12(4): 485-504.
|
[17] |
PENTA F, ESPOSITO L, PUCILLO G P, et al. On the homogenization of periodic beam-like structures[J]. Procedia Structural Integrity,2018,8: 399-409.
|