Citation: | WU Dafang, WANG Huaitao, ZHU Fanghui. Optical Measurement of Heated-Front-Surface Strains for Components in High Temperature Environments up to 1200 ℃[J]. Applied Mathematics and Mechanics, 2018, 39(6): 631-644. doi: 10.21656/1000-0887.390084 |
[1] |
SZIROCZAK D, SMITH H. A review of design issues specific to hypersonic flight vehicles[J]. Progress in Aerospace Sciences,2016,84: 1-28.
|
[2] |
杨亚政, 杨嘉陵, 方岱宁. 高超声速飞行器热防护材料与结构的研究进展[J]. 应用数学和力学, 2008,29(1): 47-56.(YANG Yazheng, YANG Jialing, FANG Daining. Research progress on the thermal protection materials and structures in hypersonic vehicles[J]. Applied Mathematics and Mechanics,2008,29(1): 47-56.(in Chinese))
|
[3] |
SAKAI T, KAGAYAMA T, OOMI G. Application of the strain gauge method to thermal expansion measurement under high pressure and high magnetic field[J]. Journal of Materials Processing Technology,1999,85(1/3): 224-228.
|
[4] |
WANG Xingli, WANG Wanjing, WANG Jichao, et al. Thermal strain measurement of EAST W/Cu divertor structure using electric resistance strain gauges[J]. Fusion Engineering and Design,2016,113: 1-5.
|
[5] |
HUANG C Y, YING K C. Applying strain gauges to measuring thermal warpage of printed circuit boards[J]. Measurement,2017,110: 239-248.
|
[6] |
CHIU C C. A method for measuring temperature-dependent stress and thermal expansion of coatings[J]. Journal of Materials Science,1993,28(21): 5684-5692.
|
[7] |
PIERRE J E, PASSIEUX J C, PERIE J N, et al. Unstructured finite element-based digital image correlation with enhanced management of quadrature and lens distortions[J]. Optics and Lasers in Engineering,2016,77: 44-53.
|
[8] |
SIDDIQUI M Z. 2D-DIC for the quantitative validation of FE simulations and non-destructive inspection of aft end debonds in solid propellant grains[J]. Aerospace Science and Technology,2014,39: 128-136.
|
[9] |
KOOHBOR B, MALLON S, KIDANE A, et al. A DIC-based study of in-plane mechanical response and fracture of orthotropic carbon fiber reinforced composite[J]. Composites Part B: Engineering,2014,66: 388-399.
|
[10] |
MEYER P, WAAS A M. Measurement of in situ-full-field strain maps on ceramic matrix composites at elevated temperature using digital image correlation[J]. Experimental Mechanics,2015,55(5): 795-802.
|
[11] |
LEPLAY P, LAFFORGUE O, HILD F. Analysis of asymmetrical creep of a ceramic at 1 350 ℃ by digital image correlation[J]. Journal of the American Ceramic Society,2015,98(7): 2240-2247.
|
[12] |
GUO Xiang, LIANG Jin, TANG Zhengzong, et al. High-temperature digital image correlation method for full-field deformation measurement captured with filters at 2 600 ℃ using spraying to form speckle patterns[J]. Optical Engineering,2014,53(6): 063101. DOI: 10.1117/1.OE.53.6.063101.
|
[13] |
LYONS J S, LIU J, SUTTON M A. High-temperature deformation measurements using digital-image correlation[J].Experimental Mechanics,1996,36(1): 64-70.
|
[14] |
YUAN Wu, SONG Hongwei, WANG Xi, et al. Experimental investigation on thermal buckling behavior of truss-core sandwich panels[J].AIAA Journal,2015,53(4): 948-957.
|
[15] |
MAO W G, CHEN J, SI M S, et al. High temperature digital image correlation evaluation of in-situ failure mechanism: an experimental framework with application to C/SiC composites[J]. Materials Science & Engineering A,2016,665: 26-34.
|
[16] |
CHU P H C, MARKSBERRY C L, SAARI D P. High temperature storage heater technology for hypersonic wind tunnels and propulsion test facilities[C]// AIAA/CIRA 13th International Space Planes and Hypersonics Systems and Technologies Conference.Capua, Italy, 2005.
|
[17] |
BOUSLOG S A, MOORE B, LAWSON I, et al. X-33 metallic TPS tests in NASA-LARC high temperature tunnel[C]//37th Aerospace Sciences Meeting and Exhibit.Reno, NV, 1999.
|
[18] |
ZIEMKE R A. Infrared heater used in qualification testing of international space station radiators[R]. NASA Technical Reports Server(NTRS), 2004.
|
[19] |
BAI Dan, FAN Xuji. Transient coupled heat transfer in multilayer non-gray semitransparent media with reflective foils[J]. International Journal of Thermophysics,2006,27(2): 647-664.
|
[20] |
DARYABEIGI K. Thermal analysis and design of multi-layer insulation for re-entry aerodynamic heating[C]// 35th AIAA Thermophysics Conference.Anaheim, CA, 2001.
|
[21] |
PAN Bing, WU Dafang, YU Liping. Optimization of a three-dimensional digital image correlation system for deformation measurements in extreme environments[J].Applied Optics,2012,51(19): 4409-4419.
|
[22] |
吴大方, 潘兵, 高镇同, 等. 超高温、 大热流、 非线性气动热环境试验模拟及测试技术研究[J]. 实验力学, 2012,27(3): 255-271.(WU Dafang, PAN Bing, GAO Zhentong, et al. On the experimental simulation of ultra-high temperature, high heat flux and nonlinear aerodynamic heating environment and thermo-machanical testing technique[J]. Journal of Experimental Mechanics,2012,27(3): 255-271.(in Chinese))
|
[23] |
WU Dafang, WANG Yuewu, SHANG Lan, et al. Thermo-mechanical properties of C/SiC composite structure under extremely high temperature environment up to 1 500 ℃[J].Composites Part B: Engineering,2016,90: 424-431.
|
[24] |
WU Dafang, WANG Yuewu, SHANG Lan, et al. Experimental and computational investigations of thermal modal parameters for a plate-structure under 1 200 ℃ high temperature environment[J].Measurement,2016,94: 80-91.
|
[25] |
PETERS W H, RANSON W F. Digital imaging techniques in experimental stress analysis[J].Optical Engineering,1982,21(3): 427-431.
|
[26] |
BRUCK H A, MCNEILL S R, SUTTON M A, et al. Digital image correlation using Newton-Raphson method of partial differential correction[J].Experimental Mechanics,1989,29(3): 261-267.
|
[27] |
TONG W. An evaluation of digital image correlation criteria for strain mapping applications[J]. Strain,2005,41: 167-175.
|
[28] |
CARUTA B M.New Developments in Materials Science Research [M]. New York: Nova Science Publishers, 2007.
|