[1] |
白井艳, 杨科, 李宏利, 徐建中. 水平轴风力机专用翼型族设计[J]. 工程热物理学报, 2010,31(4): 589-592. (BAI Jing-yan, YANG Ke, LI Hong-li, XU Jian-zhong. Design of the horizontal axis wind turbine airfoil family[J].Journal of Engineering Thermophysics,2010,31(4): 589-592.(in Chinese))
|
[2] |
Wolfe W P, Ochs S S. CFD calculations of S 809 aerodynamic characteristics[C]// American Society of Mechanical Engineers Wind Energy Symposium.Reno, United States of America, 1997.
|
[3] |
Johansen J, Srensen N N. Aerofoil characteristics from 3D CFD rotor computations[J].Wind Energy,2004,7(4): 283-294.
|
[4] |
Hartwanger D, Horvat A. 3D modelling of a wind turbine using CFD[C]// NAFEMS Conference.United Kingdom, 2008.
|
[5] |
Laursen J, Enevoldsen P, Hjort S. 3D CFD quantification of the performance of a multi-megawatt wind turbine[C]// Journal of Physics: Conference Series,Vol75, 2007.doi: 10.1088/17426596/75/1/012007.
|
[6] |
王琦峰, 陈伯君, 安亦然. 大型风力机三维空气动力学数值模拟[J].空气动力学学报, 2011,29(6): 810-814. (WANG Qi-feng, CHEN Bo-jun, AN Yi-ran. 3D numerical simulation for aerodynamic performance of large scale wind turbine[J].Acta Aerodynamica Sinica,2011,29(6): 810-814. (in Chinese))
|
[7] |
SezerUzol N, Long L N. 3-D time-accurate CFD simulations of wind turbine rotor flow fields[R]. American Institute of Aeronautics and Astronautics, No 2006-0394, 2006.
|
[8] |
Zahle F, Srensen N N, Johansen J. Wind turbine rotor-tower interaction using an incompressible overset grid method[J].Wind Energy,2009,12(6): 594-619.
|
[9] |
Van Garrel A.Development of a Wind Turbine Aerodynamics Simulation Module[M]. Netherlands: Energy Research Centre of the Netherlands, 2003.
|
[10] |
Muhammad G, Shah N A, Mushtaq M. Merits and demerits of boundary element methods for incompressible fluid flow problems[J].The Journal of American Science,2009,5(6): 57-61.
|
[11] |
Hess J L, Smith A M O. Calculation of nonlifting potential flow about threedimensional bodies[R]. United States of America: McDonnel Douglas Report, No E S 40622, 1966.
|
[12] |
Hess J L, Smith A M O. Calculation of potential flow about arbitrary bodies[J].Progress in Aeronautical Sciences,1967,8: 1-138.
|
[13] |
Newman J N. Distributions of sources and normal dipoles over a quadrilateral panel[J].Journal of Engineering Mathematics,1986,20(2): 113-126.
|
[14] |
王强, 徐宇, 王胜军, 徐建中. 基于三维面元法的风力机三维流场计算[C]//中国工程热物理学会学术会议. 哈尔滨, 2012. (WANG Qiang, XU Yu, WANG Sheng-jun, XU Jian-zhong. 3D flow fluid computation of HAWT based on 3D panel method[C]// Chinese Society of Engineering Thermophysics Conference.Harbin, 2012.(in Chinese))
|
[15] |
WANG Qiang, WANG Zhong-xia, SONG Juan-juan, XU Yu, XU Jian-zhong. Study on a new aerodynamic model of HAWT based on panel method and reduced order model using proper orthogonal decomposition[J].Renewable Energy,2012,48: 436-447.
|
[16] |
汉森.风力机空气动力学[M].第2版. 肖劲松 译. 北京:中国电力出版社, 2009.(Hansen Martin O L.Aerodynamics of Wind Turbine[M]. 2nd ed. XIAO Jing-song trans. Beijing: China Electric Power Press, 2009.(in Chinese))
|
[17] |
Du Z, Selig M. The effect of rotation on the boundary layer of a wind turbine blade[J].Renewable Energy,2000, 20(2): 167-181.
|
[18] |
Du Z, Selig M S. A 3-D stall-delay model for horizontal axis wind turbine performance prediction[R]//American Institute of Aeronautics and Astronautics98-0021, 1998: 9-19.
|
[19] |
王建礼, 徐建中. 一种改进的诱导因子计算方法[J]. 工程热物理学报, 2009,30(9): 14891491.(WANG Jian-li, XU Jian-zhong. An improved calculation method of induction factors[J].Journal of Engineering Thermophysics,2009,30(9): 1489-1491.(in Chinese))
|
[20] |
Burton T, Sharpe D, Jenkins N, Bossanyi E. 风能技术[M]. 武鑫, 谷海涛, 李海东, 邵桂萍, 林资旭, 王宇龙, 胡春松, 潘磊, 李建林, 鄂春良, 李亚西 译. 北京:科学出版社, 2007: 41-62. (Burton T, Sharpe D, Jenkins N, Bossanyi E.Wind Energy [M]. WU Xin, GU Hai-tao, LI Hai-dong, SHAO Guo-ping, LIN Zi-xu, WANG Yu-long, HU Chun-song, PAN Lei, LI Jian-lin, E Chun-liang, LI Ya-xi trans. Beijing: Science Press, 2007: 41-62. (Chinese version))
|
[21] |
廖猜猜, 石可重, 赵晓路. 设计参数对叶片气动性能的影响研究[C]//中国工程热物理学会学术会议. 哈尔滨, 2012. (LIAO Cai-cai, SHI Ke-zhong, ZHAO Xiao-lu. Design parameters on the blade aerodynamic performance[C]// Chinese Society of Engineering Thermophysics Conference.Harbin, 2012. (in Chinese))
|
[22] |
Thomsen O T. Sandwich materials for wind turbine blades[C]// 27th International Conference on Materials Science.Denmark, 2006.
|
[23] |
McKittrick L R, Cairns D S.Analysis of a Composite Blade Design for the AOC 15/50 Wind Turbine Using a Finite Element Model [M]. Sandia National Laboratories, 2001.
|
[24] |
Bechly M E, Clausent P D. Structural design of a composite wind turbine blade using finite element analysis[J].Computer & Structures,1997,63(3): 639-646.
|
[25] |
Jureczko M, Pawlak M. Optimization of wind turbine blades[J].Journal of Materials Processing Technology,2005,167(2/3): 463-471.
|
[26] |
Berggreen C, Branner K. Application and analysis of sandwich elements in the primary structure of large wind turbine blades[J].Journal of Sandwich Sturctures and Materials,2007,9(6): 5525-552.
|
[27] |
Overgaard L C T, Lund E, Thomsen O T. Structural collapse of a wind turbine blade—part A: static test and equivalent single layered models[J].Composites: Part A,2010 ,41(2): 257-270.
|
[28] |
Ahlstrom A. Influence of wind turbine flexibility on loads and power production[J].Wind Energy,2006,9(3): 237-249.
|
[29] |
王建礼, 石可重, 廖猜猜, 徐建中. 风力机叶片耦合振动力学模拟及实验研究[J]. 工程热物理学报, 2013,34(1): 67-70. (WANG Jian-li, SHI Ke-zhong, LIAO Cai-cai, XU Jian-zhong. Study on coupled vibration simulation and experiment of wind turbine blade[J].Journal of Engineering Thermophysics,2013,34(1): 67-70.(in Chinese))
|
[30] |
Davidson P A.Turbulence: An Introduction for Scientists and Engineers [M]. USA: Oxford University Press, 2004.
|
[31] |
Wilcox D C.Turbulence Modeling for CFD [M]. La Canada, California: DCW Industries, 1998.
|
[32] |
Réthoré PE. Wind turbine wake in atmospheric turbulence[D]. PhD Thesis. Denmark: Aalborg University, 2009.
|
[33] |
von Collani E, Binder A, Sans W, Heitmann A, AlGhazali K. Design load definition by LEXPOL[J].Wind Energy,2008,11(6): 637-653.
|
[34] |
Ragan P, Manuel L. Statistical extrapolation methods for estimating wind turbine extreme loads[J].Journal of Solar Energy Engineering,2008,130(3): 1-15.
|
[35] |
Jensen J J, Olsen A S, Mansour A E. Extreme wave and wind response predictions[J]. Ocean Engineering,2011,38(17/18): 2244-2253.
|
[36] |
陈严, 王楠. 水平轴风力机极限载荷预测方法的研究[J]. 汕头大学学报(自然科学版), 2005,20(1): 43-47.(CHEN Yan, WANG Nan. Limit load forecasting method of horizontal axis wind turbine[J].Journal of Shantou University(Natural Sciences),2005,20(1): 43-47.(in Chinese))
|
[37] |
Fuglsang P, Madsen H A. Optimization method for wind turbine rotors[J].Journal of Wind Engineering and Industrial Aerodynamics,1999,80(1/2): 191-206.
|
[38] |
Kong C, Kim T, Han D J, Sugiyama Y. Investigation of fatigue life for a medium scale composite wind turbine blade[J].International Journal of Fatigue,2006,28(10): 1382-1388.
|
[39] |
Moriarty P J, Holley W E, Butterfield S. Effect of turbulence variation on extreme load prediction for wind turbines[J].Journal of Solar Energy Engineering,2002,124(4): 387-395.
|
[40] |
Thomsen K, Sorensen P. Fatigue loads for wind turbines operating in wakes[J].Journal of Wind Engineering and Industrial Aerodynamics,1999,80(1): 121-136.
|
[41] |
廖猜猜. 极限载荷条件下的风力机叶片铺层优化设计研究[D]. 博士学位论文. 北京:中国科学院工程热物理研究所, 2012.(LIAO Cai-cai. Study on wind turbine blade layers optimization design under extreme loads[D]. PhD Thesis. Beijing: Institute of Engineering Thermophysics, Chinese Academy of Sciences, 2012. (in Chinese))
|
[42] |
YE Zhi-quan, CHENG Zhao-xue, CHEN Jing-yi, BAI Shi-bao. Aerodynamic optimum design procedure and program for the rotor of a horizontalaxis wind turbine[J].Journal of Wind Engineering and Industrial Aerodynamics,1992,39(1/3): 179-186.
|
[43] |
Selig M S, CoverstoneCarroll V L. Application of a genetic algorithm to wind turbine design[J]. Journal of Energy Resource Technology,1996, 118(1): 22-28.
|
[44] |
Benini E, Toffolo A. Optimal design of horizontalaxis wind turbines using blade-element theory and evolutionary computation[J].Journal of Solar Energy Engineering,2002,124(4): 357-363.
|
[45] |
Jureczko M, Pawlak M, Mezyk A. Optimization of wind turbine blades[J].Journal of Materials Processing Technology,2005, 167(2/3): 463-447.
|
[46] |
Grujicic M, Arakere G, Pandurangan B, Sellappan V, Vallejo A, Ozen M. Multidisciplinary design optimization for glass-fiber epoxy-matrix composite 5 MW horizontal-axis wind-turbine blades[J].Journal of Materials Engineering and Performance,2010,19(8): 1116-1127.
|
[47] |
LIAO Caicai, ZHAO Xiao-lu, XU Jian-zhong. Blade layers optimization of wind turbines using FAST and improved PSO algorithm[J].Renewable Energy,2012,42: 227-233.
|