蜂窝夹芯结构用连接接头抗冲击性能研究

张智扬; 赵振宇; 任建伟; 高辉遥

doi:10.21656/1000-0887.450131

蜂窝夹芯结构用连接接头抗冲击性能研究

doi: 10.21656/1000-0887.450131

张智扬^1,2,
赵振宇^1,2, ,,
任建伟^1,2,3,
高辉遥^1,2

1. 南京航空航天大学航空航天结构力学及控制国家重点实验室，南京 210016;
2. 南京航空航天大学多功能轻量化材料与结构工信部重点实验室，南京 210016;
3. 火箭军工程大学，西安 710025

基金项目:

国家自然科学基金（11972185；12002156）

详细信息

作者简介:
张智扬（1997—），男，博士生 (E-mail: zhangzy9712@163.com);赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).

通讯作者:
赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).

中图分类号: O347.1
计量
- 文章访问数: 56
- HTML全文浏览量: 16
- PDF下载量: 12
- 被引次数: 0
出版历程
- 收稿日期: 2024-05-09
- 修回日期: 2024-06-09
- 网络出版日期: 2024-09-06

Study on Impact Resistance of Connection Joints for Honeycomb Sandwich Structures

ZHANG Zhiyang^1,2,
ZHAO Zhenyu^{1,2
, ,},
REN Jianwei^1,2,3,
GAO Huiyao^1,2

1. State Key Laboratory of Mechanics and Control for Aerospace Structures,Nanjing University of Aeronautics and Astronautics, Nanjing 210016, P.R.China;
2. MIIT Key Laboratory of Multifunctional Lightweight Materials and Structures (MLMS),Nanjing University of Aeronautics and Astronautics, Nanjing 210016, P.R.China;
3. PLA Rocket Force University of Engineering, Xi’an 710025, P.R.China

Funds:

The National Science Foundation of China(11972185；12002156)

摘要

摘要: 夹层结构在工程领域的应用广泛，但其连接装配问题却日益突出，尤其是面临强动载荷下的作战装备，如何设计连接接头以提升结构的可靠性及维修性，是目前研究的热点.针对蜂窝夹芯防护结构在典型作战环境中的连接装配问题，设计了一种由方管锁定的快速组装连接接头，并通过泡沫子弹冲击实验以获得连接结构在不同冲量下的动态响应，随后采用有限元方法对冲击试验进行了模拟，仿真结果与实验结果吻合度较好.在此基础上，利用该有限元模型进一步探讨了方管壁厚、连接单元宽度等几何参数对该结构在泡沫子弹冲击载荷作用下的峰值挠度的影响.结果表明，较薄方管壁厚(t_t/t_f≤0.375)使得连接结构容易陷入方管压溃的失效模式导致其峰值挠度显著增大，而较小的连接单元宽度(2a/W≤0.267)将导致面板抗拉强度下降，进而削弱连接结构抗冲击性能.此外，随着连接单元宽度的不断增加，连接结构的峰值挠度呈现先减小后增大的趋势，这是由于连接单元的有效横截面积与机械互锁接触面积之间存在竞争机制.当前研究表明，这种快速组装连接接头能有效抵御动态冲击载荷，具有抗冲击吸能、便于维护更换的特点，有望应用于各型主战装备防护结构的连接，为夹层连接结构的抗冲击设计提供参考.
- 蜂窝夹芯结构 /
- 连接接头 /
- 快速组装 /
- 抗冲击 /
- 动态力学行为
Abstract: Sandwich structures are widely used in engineering fields, but their connection and assembly problems become more and more prominent, especially for combat equipment under strong dynamic loads. How to design connection joints to improve the reliability and maintainability of the structure is a hot research topic at present. Aimed at the connection and assembly problem of honeycomb sandwich protection structures in typical combat environment, a quick assembly joint locked by square tubes was designed, and the dynamic responses of the connection structure under different impulses were obtained by foam projectile impact tests. Then the finite element method was used to simulate the impact test, and the simulation results agree well with the experimental results. On this basis, the effects of geometric parameters such as wall thicknesses and connection unit widths on the peak deflections of the structure under the foam projectile impacts were further discussed with the finite element model. The results indicate that, the thinner wall thickness(t_t/t_f≤0.375) of the square tube makes the connection structure prone to collapse, leading to a significant increase in peak deflections. However, a smaller width (2a/W≤0.267) of the connection unit causes the panel tensile strength to decrease, thereby weakening the impact resistance of the connection structure. In addition, as the connection unit width increases, the peak deflection of the connection structure will first decrease and then increase. This is due to the competition mechanism between the effective crosssectional area of the connection unit and the mechanical interlocking contact area. The proposed quick assembly connection joint can effectively resist dynamic impact loads, has good impact energy absorption abilities, and easy maintenance and replacement. It is hopeful to be applied to the connection of various types of main combat equipment protection structures, and provides reference for the impact resistance design of sandwich connection structures.
- honeycomb sandwich structure /
- connection joint /
- quick assembly /
- impact resistance /
- dynamic mechanical behavior

HTML全文

参考文献(34)

PAIK J K, THAYAMBALLI A K, KIM G S. The strength characteristics of aluminum honeycomb sandwich panels[J].Thin-Walled Structures,1999,35(3): 205-231.

[2]SUN G, CHEN D, HUO X, et al. Experimental and numerical studies on indentation and perforation characteristics of honeycomb sandwich panels[J].Composite Structures,2018,184: 110-124.

[3]REDDY B G V, SHARMA K V, REDDY T Y. Deformation and impact energy absorption of cellular sandwich panels[J].Materials & Design,2014,61: 217-227.

[4]GIBSON L, ASHBY M F.Cellular Solids Structure and Properties[M]. Cambridge: Cambridge University Press, 1999.

[5]ADHIKARI S. The in-plane mechanical properties of highly compressible and stretchable 2D lattices[J].Composite Structures,2021, 272: 114167.

[6]李金矿, 万文玉, 刘闯. 形状记忆合金蜂窝结构抗冲击性能研究[J]. 应用数学和力学, 2024,45(1): 34-44. （LI Jinkuang, WAN Wenyu, LIU Chuang. Study on impact resistance of shape memory alloy honeycomb structures[J].Applied Mathematics and Mechanics,2024,45(1): 34-44.（in Chinese))

[7]DAFANG W, LIMING Z, BING P, et al. Thermal protection performance of metallic honeycomb core panel structures in non-steady thermal environments[J].Experimental Heat Transfer,2016,29(1): 53-77.

[8]HUANG W C, NG C F. Sound insulation improvement using honeycomb sandwich panels[J].Applied Acoustics,1998,53(1/3): 163-177.

[9]NG C F, HUI C K. Low frequency sound insulation using stiffness control with honeycomb panels[J].Applied Acoustics, 2008, 69(4): 293-301.

[10]PALOMBA G, EPASTO G, CRUPI V, et al. Single and double-layer honeycomb sandwich panels under impact loading[J].International Journal of Impact Engineering,2018,121: 77-90.

[11]XIE S, JING K, ZHOU H, et al. Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact[J].Composite Structures,2020,235: 111814.

[12]ZHANG D, FEI Q, ZHANG P. Drop-weight impact behavior of honeycomb sandwich panels under a spherical impactor[J].Composite Structures,2017,168: 633-645.

[13]GABRIELE I, LINFORTH S, NGO T D, et al. Blast resistance of auxetic and honeycomb sandwich panels: comparisons and parametric designs[J].Composite Structures,2018,183: 242-261.

[14]SAWANT R, PATEL M, PATEL S. Numerical analysis of honeycomb sandwich panels under blast load[J].Materials Today: Proceedings,2023,87: 67-73.

[15]YAHAYA M A, RUAN D, LU G, et al. Response of aluminium honeycomb sandwich panels subjected to foam projectile impact: an experimental study[J].International Journal of Impact Engineering,2015, 75: 100-109.

[16]WEN H M, REDDY T Y, REID S R, et al. Indentation, penetration and perforation of composite laminate and sandwich panels under quasi-static and projectile loading[J].Key Engineering Materials,1998,143: 501-552.

[17]MENNA C, ZINNO A, ASPRONE D, et al. Numerical assessment of the impact behavior of honeycomb sandwich structures[J].Composite Structures,2013,106: 326-339.

[18]EBRAHIMI H, GHOSH R, MAHDI E, et al. Honeycomb sandwich panels subjected to combined shock and projectile impact[J].International Journal of Impact Engineering,2016,95: 1-11.

[19]SUN G, CHEN D, WANG H, et al. High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations[J].International Journal of Impact Engineering,2018,122: 119-136.

[20]RATHBUN H J, RADFORD D D, XUE Z, et al. Performance of metallic honeycomb-core sandwich beams under shock loading[J].International Journal of Solids and Structures,2006,43(6): 1746-1763.

[21]DHARMASENA K P, WADLEY H N G, XUE Z, et al. Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading[J].International Journal of Impact Engineering,2008,35(9): 1063-1074.

[22]CASTANI B, BOUVET C, GINOT M. Review of composite sandwich structure in aeronautic applications[J].Composites （Part C）: Open Access,2020,1: 100004.

[23]张杜江, 赵振宇, 褚庆国, 等. 浅埋爆炸下考虑乘员安全的防雷底板设计理论模型[J/OL]. 应用力学学报, 2024[2024-06-09］. https://kns.cnki.net/kcms/detail/61.1112.o3.20221124.1404.006.html. （ZHANG Dujiang, ZHAO Zhenyu, CHU Qingguo, et al. Theoretical model of armored vehicle bottom plate subjected to detonation of shallow-buried explosives, with occupant safety considered[J/OL].Chinese Journal of Applied Mechanics,2024[2024-06-09］. https://kns.cnki. net/kcms/detail/61.1112.o3.20221124.1404.006.html.（in Chinese))

[24]CRUPI V, EPASTO G, GUGLIELMINO E. Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading[J].International Journal of Impact Engineering,2012,43: 6-15.

[25]ELGEWELY E. 3D reconstruction of furniture fragments from the ancient town of karanis[J].Studies in Digital Heritage,2017,1(2): 409-427.

[26]KOZAK J. Selected problems on application of steel sandwich panels to marine structures[J].Polish Maritime Research,2009,16(4): 9-15.

[27]LIU Z, MAJUMDAR P K, COUSINS T E, et al. Development and evaluation of an adhesively bonded panel-to-panel joint for a FRP bridge deck system[J].Journal of Composites for Construction,2008,12(2): 224-233.

[28]ZHOU A, KELLER T. Joining techniques for fiber reinforced polymer composite bridge deck systems[J].Composite Structures,2005,69(3): 336-345.

[29]BANHART J. Manufacture, characterisation and application of cellular metals and metal foams[J].Progress in Materials Science,2001,46(6): 559-632.

[30]SCHLER P, FISCHER S F, BHRIG-POLACZEK A, et al. Deformation and failure behaviour of open cell Al foams under quasistatic and impact loading[J].Materials Science and Engineering: A,2013, 587: 250-261.

[31]张杜江, 赵振宇, 贺良, 等. 基于Johnson-Cook本构模型的高强度装甲钢动态力学性能参数标定及验证[J]. 兵工学报, 2022,43(8): 1966-1976.（ZHANG Dujiang, ZHAO Zhenyu, HE Liang, et al. Calibration and verification of dynamic mechanical properties of high-strength armored steel based on Johnson-Cook constitutive model[J].Acta Armamentarii,2022,43(8): 1966-1976.（in Chinese))

[32]NAHSHON K, PONTIN M, EVANS A, et al. Dynamic shear rupture of steel plates[J].Journal of Mechanics of Materials and Structures,2007,2(10): 2049-2066.

[33]郭子涛, 高斌, 郭钊, 等. 基于J-C模型的Q235钢的动态本构关系[J]. 爆炸与冲击, 2018,38(4): 804-810.（GUO Zitao, GAO Bin, GUO Zhao, et al. Dynamic constitutive relation based on J-C model of Q235 steel[J].Explosion and Shock Waves,2018,38(4): 804-810.（in Chinese))

[34]SUN G, CHEN D, WANG H, et al. High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations[J].International Journal of Impact Engineering,2018, 122: 119-136.

施引文献

资源附件(0)

访问统计

计量

文章访问数: 56
HTML全文浏览量: 16
PDF下载量: 12
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

蜂窝夹芯结构用连接接头抗冲击性能研究

doi: 10.21656/1000-0887.450131

作者简介:
张智扬（1997—），男，博士生 (E-mail: zhangzy9712@163.com);赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).

通讯作者:
赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).

计量

Study on Impact Resistance of Connection Joints for Honeycomb Sandwich Structures

计量

目录

留言板

蜂窝夹芯结构用连接接头抗冲击性能研究

doi: 10.21656/1000-0887.450131

作者简介: 张智扬（1997—），男，博士生 (E-mail: zhangzy9712@163.com);赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).

通讯作者: 赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).

计量

出版历程

Study on Impact Resistance of Connection Joints for Honeycomb Sandwich Structures

计量

出版历程

目录

作者简介:
张智扬（1997—），男，博士生 (E-mail: zhangzy9712@163.com);赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).

通讯作者:
赵振宇（1986—），男，副研究员，博士(通讯作者. E-mail: zhenyu_zhao@nuaa.edu.com.cn).