四边简支对称正交层合矩形板的非线性弯曲问题

刘人怀; 何陵辉

四边简支对称正交层合矩形板的非线性弯曲问题

上海工业大学, 上海市应用数学和力学研究所

计量
- 文章访问数: 2457
- HTML全文浏览量: 216
- PDF下载量: 431
- 被引次数: 0
出版历程
- 收稿日期: 1989-11-13
- 刊出日期: 1990-09-15

Nonlinear Bending of Simply Supported Symmetric Laminated Cross-Ply Rectangular Plates

Shanghai University of Technology, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai

摘要

摘要: 本文在von Kármán型板理论的基础上,采用双重Fourier级数方法,研究了对称正交层合矩形板在简支边条件下,承受任意分布横向载荷和面内载荷联合作用的非线性弯曲问题,得到了满足控制方程和边界条件的解.
- 层合矩形板 /
- 非线性弯曲 /
- 控制方程
Abstract: Based on the von Kármán-type theory of plates, nonlinear bending problems of simply supported symmetric laminated cross-ply rectangular plates under the combined action of pressure and inplane load are investigated in this paper. The solution which satisfies the governing equations and boundary conditions is obtained by using the double Fourier series method.
- laminated rectangular plate /
- nonlinear bending /
- governing equation

HTML全文

参考文献(17)

[1]	Лехнидкий С.Г.,Анцбоmролные Пласmнцкц,Гостехиздат,Москва(1947).中译本:列赫尼茨基,《各向异性板》,科学出版社,北京(1983),
[2]	Stavsky, Y., On the general theory of heterogeneous aeolotropic plates, Aeronaut. Q., 16(1964), 29.
[3]	Whitney, J. M. and A. W. Leissa, Analysis of heterogeneous anisotropic plates, ASME J. Appl. Mech., 36(1969), 261.
[4]	Turvey, G.J. and W.H. Wittrick, The large deflection and postbuckling behaviour of some laminated plates, Aeronaut. Q., 24(1973), 77.
[5]	Chia, C. Y., Large deflections of heterogeneous anisotropic rectangular plates, Int.J. Solids Struct., 10(1974), 965.
[6]	Chia, C. Y. and M. K. Prabhakara, Large deflection of unsymmetric cross-plyandangle-ply plates, J. Mech. Eng. Sci., 18(1976), 179.
[7]	Zaghloul, S. A. and J. B. Kennedy, Nonlinear behaviour of symmetrically laminated plates, ASME J. Appl. Mech., 42(1975), 234.
[8]	Prabhakara, M. K. and C. Y. Chia, Finite deflections of unsymmetrically layered anisotropic rectangular plates subjected to the combined action of transverse and inplane loads, ASMEJ. Appl. Mech., 42(1975), SI7.
[9]	Prabhakara, M. K. and C. Y. Chia, Nonlinear analysis of laminated cross-ply plates, J. Eng. Mech. Div., Proc. ASCE, 103EM4(1977), 749.
[10]	Prabhakara, M. K., Finite deflections of unsymmetric angle-ply anisotropic rectangular plates under edge moments, ASME J. Appl. Mech., 44(1977), 171.
[11]	Chandra, R., Nonlinear bending of antisymmetric angle-ply laminated plates, Fib. Sci. and Tech., 10(1977), 123.
[12]	周次青,对称正交铺设矩形叠层板的非线性弯曲,应用数学和力学,6, 9 (1985), 819.
[13]	周次青,不对称的各向异性叠层矩形板的非线性弯曲(I),应用数学和力学,7, 11 (1986),1003.
[14]	周次青,对称铺设各向异性叠层矩形板的非线性弯曲,应用数学和力学,9, 3 (1988), 267.
[15]	Chia, C.Y., Nonlinear bending of unsymmetric angle-ply plates with edges elastically restrained against rotation, Acta Mech., 63(1984), 201.
[16]	Chia, C. Y., Large deflection of unsymmetrical laminates with mixed boundary conditions, Int. J. Non-Linear Mech., 20(1985), 273.
[17]	Chia, C. Y., Nonlinear Analysis of Plates, McGraw-Hill, New York(1980).