界面滑移流体动压膜承载能力的形成

张勇斌

界面滑移流体动压膜承载能力的形成

张勇斌

淮海工学院机械系,江苏连云港 222005

详细信息

作者简介:
张勇斌(1971- ),男,浙江仙居人,副教授,博士(E-mail:hammelrinau6@126.com).

中图分类号: O357.41
计量
- 文章访问数: 2550
- HTML全文浏览量: 179
- PDF下载量: 475
- 被引次数: 0
出版历程
- 收稿日期: 2008-04-15
- 修回日期: 2008-08-04
- 刊出日期: 2008-09-15

Boundary Slippage Used to Generate Hydrodynamic Load-Carrying Capacity

ZHANG Yong-bin

Huaihai Institute of Technology, Lianyungang, Jiangsu 222005, P. R. China

摘要

摘要: 运用界面滑移可在两平行平板表面间形成具有承载能力的流体动压膜．在流体入口区，静止平板表面上流体-接触表面的界面剪切强度具有较低值，以在该界面处产生界面滑移，而在流体出口区，静止平板表面上流体-接触表面的界面剪切强度具有足够高的值，以避免在该界面处出现界面滑移．整个运动平板表面上流体-接触表面的界面剪切强度具有足够高的值，以避免在运动平板表面上出现界面滑移．分析表明，这种流体动压接触区具有显著承载能力．使整个接触区具有最大承载能力的流体出口区宽度与入口区宽度的比值为0.5．
- 流体动压接触 /
- 承载能力 /
- 界面滑移
Abstract: Boundary slippage was used to generate the load-carrying capacity of the hydrodynamic contact between two parallel plane surfaces. In the fluid inlet zone the fluid-contact interfacial shear strength on the stationary surface is set as low to generate boundary slippage there, while in the fluid outlet zone the fluid-contact interfacial shear strength on the stationary surface is set as high enough to prevent the boundary slippage occurrence there. The fluid-contact interfacial shear strength on the whole moving surface is set as high enough to prevent boundary slippage on the moving surface. These hydrodynamic contact configurations are analyzed to generate the pronounced load-carrying capacity. The optimum ratio of the outlet zone width to the inlet zone width for the maximum loadcarrying capacity of the whole contact is analyzed to be 0.5.
- hydrodynamic contact /
- load-carrying capacity /
- boundary slippage

HTML全文

参考文献(15)

[1]	Zhang Y B.Mixed rheologies in elastohydrodynamic lubrication[J].Industrial Lubrication and Tribology,2004,56(2):88-106. doi: 10.1108/00368790410524047
[2]	Zhang Y B，Wen S.A lubrication deviation from the classical EHL theory by the lubricant viscoplasticity: Part Ⅰ-Film thickness dependence[J].Tribology Transactions,2001,44(2):224-232. doi: 10.1080/10402000108982452
[3]	Zhang Y B，Wen S.A lubrication deviation from the classical EHL theory by the lubricant viscoplasticity: Part Ⅱ-Boundary of lubrication regimes[J].Tribology Transactions,2001,44(2):305-309. doi: 10.1080/10402000108982463
[4]	Zhang Y B，Wen S.An analysis of elastohydrodynamic lubrication with limiting shear stress: Part Ⅰ- Theory and solutions[J].Tribology Transactions,2002,45(2):135-144. doi: 10.1080/10402000208982532
[5]	Zhang Y B. Contact-fluid interfacial shear strength and its critical importance in elastohydrodynamic lubrication[J].Industrial Lubrication and Tribology,2006,58(1):4-14. doi: 10.1108/00368790610640064
[6]	Zhang Y B. Contact-fluid interfacial slippage in hydrodynamic lubricated contacts[J].Journal of Molecular Liquids,2006,128(9):99-104. doi: 10.1016/j.molliq.2005.12.010
[7]	Ehret P, Dowson D, Taylor C M.On lubricant transport conditions in elastohydrodynamic conjunctions[J].Proceedings of Royal Society of London, A,1998,454(7):763-787. doi: 10.1098/rspa.1998.0185
[8]	Jacobson B J, Hamrock B J.Non-Newtonian fluid model incorporated into elastohydrodynamic lubrication of rectangular contacts[J].ASME， Journal of Tribology,1984,106(2):275-284. doi: 10.1115/1.3260901
[9]	Shieh J, Hamrock B J.Film collapse in EHL and micro-EHL[J].ASME Journal of Tribology,1991,113(2):372-377. doi: 10.1115/1.2920631
[10]	Zhang Y B，Wen S.EHL film thickness limitation theory under a limiting shear stress[J].Tribology Transactions,2002,45(4): 531-539. doi: 10.1080/10402000208982584
[11]	Kaneta M, Nishikawa H, Kanada T,et al.Abnormal phenomena appearing in EHL contacts[J].ASME Journal of Tribology,1996,118(4):886-892. doi: 10.1115/1.2831624
[12]	Guo F, Wong P L. An anomalous elastohydrodynamic lubrication film: Inlet dimple[J].ASME Journal of Tribology,2005,127(2):425-434. doi: 10.1115/1.1866165
[13]	Fu Z, Guo F, Wong P L.Non-classical elastohydrodynamic lubricating film shape under large slide-roll ratios[J].Tribology Letters,2007,27(2):211-219. doi: 10.1007/s11249-007-9227-8
[14]	Yagi K, Kyogoku K, Nakahara T.Relationship between temperature distribution in EHL film and dimple formation[J].ASME Journal of Tribology,2005,127(3):658-665. doi: 10.1115/1.1866164
[15]	Pinkus O, Sternlicht B.Theory of Hydrodynamic Lubrication[M].New York：McGraw-Hill, 1961.