Citation: | LAN Bin, YE Xian-hui, SONG Shun-cheng, WU Wan-jun, WANG Bi-hao. Formulation and Programming of a Dynamic Constitutive Model at High Strain Rates in ABAQUS for the 304NG Stainless Steel[J]. Applied Mathematics and Mechanics, 2015, 36(2): 167-177. doi: 10.3879/j.issn.1000-0887.2015.02.006 |
[1] |
GJB1060.1-1991, 舰船环境条件要求: 机械环境[S]. 1991.(GJB1060.1-1991, General requirement for environmental conditions of naval ships mechanical environments[S]. 1991.(in Chinese))
|
[2] |
陈晓宏, 吴衡毅, 黄文, 汪洋, 夏源明. 高温冲击拉伸试验技术[J]. 实验力学, 2003,18(1): 39-44.(CHEN Xiao-hong, WU Heng-yi, HUANG Wen, WANG Yang, XIA Yuan-ming. Experimental technique for high temperature tensile impact[J]. Journal of Experimental Mechanics,2003,18(1): 39-44.(in Chinese))
|
[3] |
尹征南, 王铁军. 不同应变率下PC, ABS和PC/ABS合金拉伸变形行为研究[J]. 应用数学和力学, 2012,33(4): 434-443.(YIN Zheng-nan, WANG Tie-jun. Investigation of tensile deformation behavior of PC, ABS and PC/ABS blends from low to high strain rates[J]. Applied Mathematics and Mechanics,2012,33(4): 434-443.(in Chinese))
|
[4] |
余海东, 郭永进. 基于Khan-Huang模型高强度钢DP600率相关特性实验与本构模型研究[J]. 固体力学学报, 2008,29(2): 200-204.(YU Hai-dong, GUO Yong-jin. Study on the rate-dependent experiment and constitutive model of high strength steel DP600 based on Khan-Huang model[J]. Chinese Journal of Solid Mechanics,2008,29(2): 200-204.(in Chinese))
|
[5] |
关锦清, 文潮, 刘晓新, 唐仕英, 林英睿, 李迅, 周刚. 不锈钢复合板与16MnR钢冲击拉伸力学特性研究[J]. 兵器材料科学与工程, 2010,33(1): 5-8.(GUAN Jin-qing, WEN Chao, LIU Xiao-xin, TANG Shi-ying, LIN Ying-rui, LI Xun, ZHOU Gang. Impact tensile characteristics of stainless steel clad plate and 16MnR steel[J]. Ordnance Material Science and Engineering,2010,33(1): 5-8.(in Chinese))
|
[6] |
柳爱群, 黄西成. 高应变率变形的Johnson-Cook动态本构模型参数识别方法[J]. 应用数学和力学, 2014,35(2): 219-225.(LIU Ai-qun, HUANG Xi-cheng. Identification of high-strain-rate material parameters in dynamic Johnson-Cook constitutive model[J]. Applied Mathematics and Mechanics,2014,35(2): 219-225.(in Chinese))
|
[7] |
韦习成, 谢群, 符仁钰, 李麟. HSLA TRIP钢的动态拉伸行为及其模拟[J]. 材料研究学报, 2006,20(5): 556-560.(WEI Xi-cheng, XIE Qun, FU Ren-yu, LI Ling. The dynamic tensile behavior of HSLA TRIP steel and its modeling[J]. Chinese Journal of Materials Research,2006,20(5): 556-560.(in Chinese))
|
[8] |
Kindrachuk V, Fedelich B. Stress update algorithm for the combined viscoplastic and plastic behaviours of single-crystal superalloys[J]. International Journal for Numerical Methods in Engineering,2011,88(1): 83-102.
|
[9] |
Kim J-H, Lee C-S, Kim M-H, Lee J-M. Prestrain-dependent viscoplastic damage model for austenitic stainless steel and implementation to ABAQUS user-defined material subroutine[J]. Computational Materials Science,2013,67: 273-281.
|
[10] |
WANG Meng, SHI Yong-jiu, WANG Yuan-qing. Equivalent constitutive model of steel with cumulative degradation and damage[J]. Journal of Constructional Steel Research,2012,79: 101-114.
|
[11] |
SHI Yong-jiu, WANG Meng, WANG Yuan-qing. Experimental and constitutive model study of structural steel under cyclic loading[J]. Journal of Constructional Steel Research,2011,67: 1185-1197.
|
[12] |
刘伟先, 周光明, 王新峰. 基于渐进损伤模型的复合材料斜接接头的拉伸强度[J]. 材料科学与工程学报, 2012,30(5): 666-671.(LIU Wei-xian, ZHOU Guang-ming, WANG Xin-feng. Parametric study on the tensile strength of the composites’ scarf joint using progressive damage model[J]. Journal of Materials Science and Engineering,2012,30(5): 666-671.(in Chinese))
|
[13] |
汪品红. 基于Abaqus子程序的高分子材料本构关系实现[J]. 计算机辅助工程, 2013,22(增刊2): 408-410.(WANG Pin-hong. Implementation of polymers constitutive relationship based Abaqus subroutine[J]. Computer Aided Engineering,2013,22(Suppl 2): 408-410.(in Chinese))
|
[14] |
高军, 黄再兴. 基于Anand本构关系的损伤模型及其在ABAQUS中的单元验证[J]. 力学季刊, 2011,32(2): 153-158.(GAO Jun, HUANG Zai-xin. A damage model based on Anand’s constitutive relation and its element level’s verification in ABAQUS[J]. Chinese Quarterly of Mechanics,2011,32(2): 153-158.(in Chinese))
|
[15] |
王仁, 黄文彬, 黄筑平. 塑性力学引论[M]. 北京: 北京大学出版社, 1992.(WANG Ren, HUANG Wen-bin, HUANG Zhu-ping. Introduction of Plastic Mechanics [M]. Beijing: Peking University Press, 1992.(in Chinese))
|
[16] |
Belytschko T, Liu W K, Moran B. Nonlinear Finite Element for Continua and Structures[M]. John Wiley & Sons Ltd, 2000.
|
[17] |
Simo J C, Taylor R L. Consistent tangent operators for rate-independent elastoplasticity[J]. Computer Methods in Applied Mechanics and Engineering,1985,48(1): 101-118.
|
[18] |
Dassault Systémes. Abaqus user subroutines reference manual[K]. 2010.
|