HAN Zhong-hua, SONG Wen-ping, GAO Yong-wei. Design and Wind-Tunnel Verification of Large-Size Wind Turbine Airfoils[J]. Applied Mathematics and Mechanics, 2013, 34(10): 1012-1027. doi: 10.3879/j.issn.1000-0887.2013.10.002
Citation: HAN Zhong-hua, SONG Wen-ping, GAO Yong-wei. Design and Wind-Tunnel Verification of Large-Size Wind Turbine Airfoils[J]. Applied Mathematics and Mechanics, 2013, 34(10): 1012-1027. doi: 10.3879/j.issn.1000-0887.2013.10.002

Design and Wind-Tunnel Verification of Large-Size Wind Turbine Airfoils

doi: 10.3879/j.issn.1000-0887.2013.10.002
Funds:  The National High-tech R&D Program of China (863 Program)(2007AA05Z448; 2012AA051301)
  • Received Date: 2013-05-01
  • Rev Recd Date: 2013-09-11
  • Publish Date: 2013-10-15
  • For a family of specially tailored airfoils, the shapes of sections along the span of the blades are the most important elements for design of wind turbine blades. The airfoils with excellent performance can dramatically improve the capability of capturing wind power, reducing structural weight to save cost of manufacturing and transportation, and lowering inertial loads as well as loads due to gust. First, the development of the main wind turbine airfoil families around the world since 1990’s was reviewed, such as S series, DU series, RIS series, and FFA series. Second, the progress of NPU-WA series for megawatt-size wind turbine was summarized, including the design process and wind-tunnel experiments. Model tests were carried out in NF-3 wind-tunnel’s two dimensional test section, which was the largest low-speed two dimensional test section in Asia with the Reynolds number up to 5 millions. The further improvement of NPU-WA airfoils for lower roughness sensitivity was also reviewed. Last, the outlook on developing new NPU-WA series for multi-megawatt wind turbines in the near future was presented.
  • loading
  • [1]
    Tangler J L, Somers D M. NREL airfoil families for HAWT’s[C]// Proc WINDPOWER ’95.Washington, D C, 1995: 117-123.
    [2]
    Timmer W A, Van Rooij R P J O M. Summary of the Delft university wind turbine dedicated airfoils[J]. Journal of Solar Energy Engineering,2003,125(4): 488496.
    [3]
    Fuglsang P, Bak C. Design and verification of the new Ris-A1 airfoil family for wind turbines[R]. AIAA paper 20010028, 2001.
    [4]
    Fuglsang P, Bak C, Antoniou I. Design and verification of the RisB1 airfoil family for wind turbines[R]. AIAA paper 2004-668, 2004.
    [5]
    Bjork A.Coordinates and calculations for the FFA-W1-xxx,FF-AW2-xxx and FFA-W3-xxx series of airfoils for horizontal axis wind turbines[R]. FFA, aeronautical research inst of Sweden, TN 199015, Stockholm, 1990.
    [6]
    乔志德, 宋文萍, 高永卫. NPU-WA系列风力机翼型的设计与风洞实验[J]. 空气动力学学报, 2012,30(2): 260-265.(QIAO Zhi-de, SONG Wen-ping, GAO Yong-wei. Design and experiment of the NPUWA airfoil family for wind turbines[J]. Acta Aerodynamica Sinica,2012,30(2): 260-265. (in Chinese))
    [7]
    乔志德, 宋文萍, 高永卫, 许建华, 孟宣市. 一族用于兆瓦级风力机叶片的翼型[P]. 中国, ZL201110023115.1, 2011.(QIAO Zhi-de, SONG Wen-ping, GAO Yong-wei, XU Jian-hua, MENG Xuan-shi. A family of airfoils for megawatt-size wind-turbines[P]. China, ZL201110023115.1, 2011. (in Chinese))
    [8]
    Han ZH, Zhang KS, Liu J, Song WP. Surrogatebased aerodynamic shape optimization with application to wind turbine airfoils[R]. AIAA paper 20131108, 2013.
    [9]
    白井艳, 杨科, 李宏利, 徐建中. 水平轴风力机专用翼型族设计[J]. 工程热物理学报, 2010,31(4): 589592.(BAI Jing-yan, YANG Ke, LI Hong-li, XU Jian-zhong. Airfoil family dedicated to horizontal axis wind turbines[J]. Journal of Engineering Thermophysics,2010,31(4): 589-592. (in Chinese))
    [10]
    杨科, 杨宏利, 徐建中. 风力机叶片翼型族[P].中国, ZL200910083401, 2010.(YANG Ke, YANG Hong-li, XU Jian-zhong. A family of airfoils for wind turbines[P]. China, ZL200910083401, 2010. (in Chinese))
    [11]
    Abbott F T, von Doenhoff A E. Theory of Wing Sections [M]. New York: Dover Publications, Inc, 1959.
    [12]
    Somers D M. The S 830, S 831, and S 832 airfoil[R]. NREL/SR-50036339, 2005.
    [13]
    Wind PACT Blade System Design Studies. Innovative design approaches for large wind turbine blades[R]. Final Report, SAND 2004-0074, Sandia National Laboratories, USA.
    [14]
    Qiao Z D. Subsonic Airfoil Design With Mixed Boundary Conditions [M]. Numerical and Applied Mathematics. IMACS. Scientific Publishing Co, 1989: 209-212.
    [15]
    钱瑞战, 乔志德, 宋文萍. 基于N-S方程的跨声速翼型多目标多约束优化设计[J].空气动力学学报, 2000,18(3): 350-355.(QIAN Rui-zhan, QIAO Zhi-de, SONG Wen-ping. Multiobjective optimization design of transonic airfoils with constraints based on Navier-Stokes equations[J]. Acta Aerodynamica Sinica,2000,18(3): 350-355. (in Chinese)
    [16]
    Qiao Z D, Qin X L, Yang X D. Wing design by solving adjoint equations[R]. AIAA 20020263, 2002.
    [17]
    乔志德.先进翼型的CFD设计及应用.“现代力学与科技进步”[M]. 庄逢甘 主编. 北京: 清华大学出版社, 1997: 984-987.(QIAO Zhi-de.Design of High-Performance Airfoil Based on CFD. Modern Mechanics and Advance in Science and Technology[M]. ZHUANG Feng-gan eds. Beijing: Tsinghua Press, 1997: 984-987. (in Chinese))
    [18]
    乔志德. 翼型设计的计算空气动力学[C]//F Dubois, 邬华谟 编. 计算流体力学新进展——理论、方法和应用. 北京: 高等教育出版社, 2001: 273-294.(QIAO Zhi-de. Computational aerodynamics of wing design[C]//F Dubois, WU Hua-mo, eds. Advance in Computational Fluid Dynamics—Theory, Methods and Applications.Beijing: Higher Education Press, 2001: 273-294.(in Chines))
    [19]
    韩忠华, 刘俊, 宋文萍. 基于代理模型的多目标、多约束高效通用优化软件: SurroOpt[CP]. No 2013SR029774, 2013.(HAN Zhong-hua, LIU Jun, SONG Wen-ping. Efficient multiobjective and multi-constrained optimization software via surrogate models: SurroOpt[CP]. No 2013SR029774, 2013.(in Chinese))
    [20]
    Liu J, Han ZH, Song WP. Efficient krigingbased aerodynamic design of transonic airfoils: some key issues[R]. AIAA paper 2012-0967, Nashville, Tennessee, Jan 4-7, 2012.
    [21]
    HAN Zhong-hua, ZHANG Ke-shi. Surrogate based optimization[C]//Olympia Roeva ed. Intec Book, RealWorld Application of Genetic Algorithm.InTech, 2012: 343-362.
    [22]
    Han ZH, Deng J, Liu J, Zhang KS , Song WP. Design of laminar supercritical airfoils based on Navier-Stokes equations[C]//28th Congress of the International Council of the Aeronautical Sciences.paper ICAS 2012-2.2.2. Brisbane, Australia. 23-28 Sep, 2012.
    [23]
    Liu J, Han ZH, Song WP. Comparison of infill sampling criteria in kriging-based aerodynamic optimization[C]// 28th Congress of the International Council of the Aeronautical Sciences.paper ICAS2012-11.10ST. Brisbane, Australia. 23-28 Sep, 2012.
    [24]
    Han ZH, Zhang KS, Song WP, Qiao ZD. Optimization of active flow control over an airfoil using a surrogatemanagement framework[J]. Journal of Aircraft,2010,47(2): 603-612. doi: 10.2514/1.45899.
    [25]
    Han ZH, Grtz S, Zimmermann R. Improving variable-fidelity surrogate modeling via gradient-enhanced kriging and a generalized hybrid bridge function[J]. Aerospace Science and Technology,2013,25(1): 177-189. doi: 10.1016/j.ast.2012.01.006.
    [26]
    Han ZH, Grtz S. A hierarchical kriging model for variable-fidelity surrogate modeling[J]. AIAA Journal,2012,50(9):1885-1896. doi: 10.2514/1.J051354.
    [27]
    Han ZH, Zimmermann R, Grtz S. An alternative cokriging model for variablefidelity surrogate modeling[J]. AIAA Journal,2012,50(5): 1205-1210. doi: 10.2514/1.J051243.
    [28]
    Qiao Z D, Yang X D, Qin X L, Zhu B. Numerical optimization design of wings by solving adjoint equations[R]. ICAS20021104.1, 2002.
    [29]
    Drela M. XFOIL: an analysis and design system for low Reynolds number airfoils[C]// Conference on Low Reynolds Number Airfoil Aerodynamics.University of Notre Dame, June 1989.
    [30]
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (2402) PDF downloads(2288) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return