Citation: | DING Yi, WU Weitao, FENG Feng, LI Shulei, YAN Hongbin. Topology Review and Convective Heat Transfer Comparison of 3D Lattice Structures[J]. Applied Mathematics and Mechanics, 2024, 45(8): 1001-1023. doi: 10.21656/1000-0887.450184 |
李勇. 超临界碳氢燃料流动传热特性及其强化机理研究[D]. 西安: 西北工业大学, 2021. (LI Yong. Study on heat transfer characteristics and strengthening mechanism of supercritical hydrocarbon fuel[D]. Xi’an: Northwestern Polytechnical University, 2021. (in Chinese))
|
[2]张凯, 吴引江, 刘高建, 等. 高孔隙率金属多孔材料的制备技术与应用[J]. 中国材料进展, 2023,42(10): 814-825. (ZHANG Kai, WU Yingjiang, LIU Gaojian,et al. Preparation technology and application of metal porous materials with high porosity[J].Materials China,2023,42(10): 814-825. (in Chinese))
|
[3]YAN H B, WU W T, ZHAO Z Y,et al. Review and comparison of turbulent convective heat transfer in state-of-the-art 3D truss periodic cellular structures[J].Applied Thermal Engineering,2023,235: 121450.
|
[4]张永存. 多孔材料传热特性分析与散热结构优化设计[D]. 大连: 大连理工大学, 2008. (ZHANG Yongcun. Heat transfer characteristic analysis and heat dissipation structure optimization design of porous materials[D]. Dalian: Dalian University of Technology, 2008. (in Chinese))
|
[5]严景好, 李杰, 李一鸣, 等. 基于梯度孔隙率金属泡沫的复合相变单元储热性能数值模拟[J]. 储能科学与技术, 2023,12(8): 2424-2434. (YAN Jinghao, LI Jie, LI Yiming, et al. Numerical simulation of thermal storage performance of composite phase change cell based on gradient porosity metal foam[J].Energy Storage Science and Technology,2023,12(8): 2424-2434. (in Chinese))
|
[6]何树, 娄钦. 多孔介质孔隙率对池沸腾传热性能影响机理的模拟研究 [J]. 应用数学和力学, 2024,45(3): 348-364. (HE Shu, LOU Qin. Simulation study of porosity effects of porous media on pool boiling heat transfer performances[J].Applied Mathematics and Mechanics,2024,45(3): 348-364. (in Chinese))
|
[7]卢天健, 何德坪, 陈常青, 等. 超轻多孔金属材料的多功能特性及应用[J]. 力学进展, 2006,36(4): 517-535. (LU Tianjian, HE Deping, CHEN Changqing, et al. The multi-functionality of ultra-light porous metals and their applications[J].Adcances in Mechanics,2006,36(4): 517-535. (in Chinese))
|
[8]MEKKI B S, LANGER J, LYNCH S. Genetic algorithm based topology optimization of heat exchanger fins used in aerospace applications[J].International Journal of Heat and Mass Transfer,2021,170: 121002.
|
[9]FENG S S, LI M Z, JOO J H, et al. Thermomechanical properties of brazed wire-woven bulk Kagome cellular metals for multifunctional applications[J].Journal of Thermophysics and Heat Transfer,2012,26(1): 66-74.
|
[10]FERRARI L, BARBATO M, ESSER B,et al. Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles[J].Composite Structures,2016,154: 61-68.
|
[11]LUO S B, XU D Q, SONG J W, et al. A review of regenerative cooling technologies for scramjets[J].Applied Thermal Engineering,2021,190: 116754.
|
[12]KAUR I, AIDER Y, NITHYANANDAM K, et al. Thermal-hydraulic performance of additively manufactured lattices for gas turbine blade trailing edge cooling[J].Applied Thermal Engineering,2022,211:118461.
|
[13]YAN H B, MEW T, LEE M G, et al. Thermofluidic characteristics of a porous ventilated brake disk[J].Journal of Heat Transfer,2015,137(2): 022601.
|
[14]YAN H B, ZHANG Q C, LU T J. Heat transfer enhancement by X-type lattice in ventilated brake disc[J].International Journal of Thermal Sciences,2016,107: 39-55.
|
[15]黄安坤, 温耀杰, 张百成, 等. 增材制造金属点阵结构性能研究进展[J]. 航空制造技术, 2023,66(11): 90-101. (HUANG Ankun, WEN Yaojie, ZHANG Baicheng, et al. Research progress on properties of metal lattice structures in additive manufacturing[J].Aeronautical Manufacturing Technology,2023,66(11): 90-101. (in Chinese))
|
[16]杨伟东, 李浩南, 王媛媛, 等. 面向增材制造的非均匀点阵结构综述[J/OL]. 机械科学与技术, 2023[2024-07-12]. https://doi.org/10.13433/ j.cnki.1003-8728.20230060. (YANG Weidong, LI Haonan, WANG Yuanyuan, et al. A review of heterogeneous lattice structures for additive manufacturing[J/OL].Mechanical Science and Technology for Aerosapce Engineering,2023[2024-07-12]. https://doi.org/10.13433/j.cnki.1003-8728.20230060.(in Chinese))
|
[17]RAZANI A, PAQUETTE J W, MONTOYA B, et al. A thermal model for calculation of heat transfer enhancement by porous metal inserts[J].Journal of Enhanced Heat Transfer,2001,8: 411-420.
|
[18]INAYAT A, FREUND H, ZEISER T, et al. Determining the specific surface area of ceramic foams: the tetrakaidecahedra model revisited[J].Chemical Engineering Science,2011,66(6): 1179-1188.
|
[19]KOOISTRA G. Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium[J].Acta Materialia,2004,52(14): 4229-4237.
|
[20]LI M, WU L, MA L, WANG B, et al. Mechanical response of all-composite pyramidal lattice truss core sandwich structures[J].Journal of Materials Science & Technology,2011,27(6): 570-576.
|
[21]REN X, XIAO L, HAO Z. Multi-property cellular material design approach based on the mechanical behaviour analysis of the reinforced lattice structure[J].Materials & Design,2019,174:117785.
|
[22]HYUN S, TORQUATO S. Optimal and manufacturable two-dimentional, Kagome-like cellular solids[J].Journal of Materials Research Society,2001,17: 137-144.
|
[23]DESHPANDE V S, FLECK N A, ASHBY M F. Effective properties of the octet-truss lattice material[J].Journal of the Mechanics and Physics of Solids,2001,49: 1747-1769.
|
[24]YUN S, KWON J, LEE D C, et al. Heat transfer and stress characteristics of additive manufactured FCCZ lattice channel using thermal fluid-structure interaction model[J].International Journal of Heat and Mass Transfer,2020,149: 119187.
|
[25]ZHANG Q C, HAN Y B, CHEN C Q, et al. Ultralight X-type lattice sandwich structure : concept, fabrication and experimental characterization[J].Science in China( Series E): Technological Sciences,2009, 52(8): 2147-2154.
|
[26]LV G X, JENSEN E, SHEN C T, et al. Effect of amine hardener molecular structure on the thermal conductivity of epoxy resins[J].ACS Applied Polymer Materials,2020,3(1): 259-267.
|
[27]TU Z C, MAO J K, HAN X S, et al. Prediction model for the anisotropic thermal conductivity of a 2.5-D braided ceramic matrix composite with thin-wall structure[J].Applied Sciences,2019,9(5): 875.
|
[28]SWEET J N, ROTH E P, MOSS M. Thermal conductivity of Inconel 718 and 304 stainless steel[J].International Journal of Thermophysics,1987,8(5): 593-606.
|
[29]DIXIT T, NITHIARASU P, KUMAR S. Numerical evaluation of additively manufactured lattice architectures for heat sink applications[J].International Journal of Thermal Sciences,2021,159: 106607.
|
[30]WANG Y, DING G F. Numerical analysis of heat transfer in a manifold microchannel heat sink with high efficient copper heat spreader[J].Microsystem Technologies,2007,14(3): 389-395.
|
[31]JIN X, SHEN B B, YAN H B, et al. Comparative evaluations of thermofluidic characteristics of sandwich panels with X-lattice and pyramidal-lattice cores[J].International Journal of Heat and Mass Transfer,2018,127: 268-282.
|
[32]ZHANG X Q, JIN X, XIE G N, et al. Thermo-fluidic comparison between sandwich panels with tetrahedral lattice cores fabricated by casting and metal sheet folding[J].Energies,2017,10(7): 906.
|
[33]SHEN B B, YAN H B, XUE H Q, et al. The effects of geometrical topology on fluid flow and thermal performance in Kagome cored sandwich panels[J].Applied Thermal Engineering,2018,142: 79-88.
|
[34]YAN H B, ZHANG Q C, CHEN W J, et al. An X-lattice cored rectangular honeycomb with enhanced convective heat transfer performance[J].Applied Thermal Engineering,2020,166: 114687.
|
[35]JOO J H, KANG K J, KIM T, et al. Forced convective heat transfer in all metallic wire-woven bulk Kagome sandwich panels[J].International Journal of Heat and Mass Transfer,2011,54(25/26): 5658-5662.
|
[36]KIM T, HODSON H P, LU T J. Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger[J].Proceedings of the Institution of Mechanical Engineers (Part C): Journal of Mechanical Engineering Science,2004,218(11): 1321-1336.
|
[37]YAN H B, YANG X H, LU T J, et al. Convective heat transfer in a lightweight multifunctional sandwich panel with X-type metallic lattice core[J].Applied Thermal Engineering,2017,127: 1293-1304.
|
[38]YAN H B, ZHANG Q C, LU T J, et al. A lightweight X-type metallic lattice in single-phase forced convection[J].International Journal of Heat and Mass Transfer,2015,83: 273-283.
|