Study on Heat Transfer Models and Mechanisms for Nanosecond Laser Removal of Paint Layers

YU Songjie; CUI Gaowei; XU Guangying

doi:10.21656/1000-0887.440344

Volume 45 Issue 12

Dec. 2024

Turn off MathJax

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 2024 > 45(12): 1577-1588

YU Songjie, CUI Gaowei, XU Guangying. Study on Heat Transfer Models and Mechanisms for Nanosecond Laser Removal of Paint Layers[J]. Applied Mathematics and Mechanics, 2024, 45(12): 1577-1588. doi: 10.21656/1000-0887.440344

Citation:

PDF( 0 KB)

Study on Heat Transfer Models and Mechanisms for Nanosecond Laser Removal of Paint Layers

doi: 10.21656/1000-0887.440344

School of Naval Architecture and Maritime, Zhejiang Ocean University, Zhoushan, Zhejiang 316022, P.R.China

Received Date: 2023-12-04
Rev Recd Date: 2024-07-11
Publish Date: 2024-12-01

Abstract

Abstract

In view of the absorption and diffusion characteristics of laser in the paint layer and the base layer, heat transfer model Ⅰ and thermal connection boundary conditions for the paint layer and the metal base layer was established. As a comparison, corresponding heat transfer models Ⅱ and Ⅲ were established, with the thermal connection conditions at the interface between the paint layer and the base layer ignored. In model Ⅲ, both the paint layer and the base layer were connected to the bulk heat source. A semi-analytical solution to the problem was obtained through the Laplacian transformation. Corresponding numerical solution examples were given through the Laplacian numerical inverse transformation. The results show that, model Ⅰ gives continuous temperature distributions, while model Ⅱ and model Ⅲ give discontinuous temperature distributions, which goes against physical reality. Secondly, based on model Ⅰ, the predicted time and energy density for cleaning and removing the paint layer are between those of model Ⅱ and model Ⅲ. The work provides a theoretical reference for improving the laser cleaning process.
- cleaning model,
- thermal connection condition,
- damage threshold,
- thermal stress

FullText(HTML)

References(25)

References

[1]	BEDAIR S M, SMITH H P. Atomically clean surfaces by pulsed laser bombardment[J]. Journal of Applied Physics, 1969, 40(12): 4776-4781. doi: 10.1063/1.1657288
[2]	叶少伟. 脉冲激光干式清洗轮胎模具的机理与实验研究[D]. 厦门: 厦门理工学院, 2020. YE Shaowei. The mechanism and experimental research of pulse laser dry cleaning tire mold[D]. Xiamen: Xiamen University of Technology, 2020. (in Chinese)
[3]	秦哲, 高谦, 王斌, 等. 飞机蒙皮纳秒脉冲激光除漆工艺与机理研究[J]. 表面技术, 2022, 51(7): 370-376. QIN Zhe, GAO Qian, WANG Bin, et al. Technology and mechanism of nanosecond pulse laser paint removal of aircraft skin[J]. Surface Technology, 2022, 51(7): 370-376. (in Chinese)
[4]	齐扬. 云冈石窟砂岩文物表面污物激光清除机理及应用研究[D]. 武汉: 中国地质大学, 2015. QI Yang. Study of mechanisms of laser cleaning of sandstone surface contaminants in Yungang grottoes and its applications[D]. Wuhan: China University of Geosciences, 2015. (in Chinese)
[5]	王泽敏, 曾晓雁, 黄维玲. 脉冲激光除漆机理及工艺参数的研究[J]. 材料保护, 2000, 33(4): 21-22. WANG Zemin, ZENG Xiaoyan, HUANG Weiling. Parameters and mechanisms of paintcoat laser cleaning[J]. Materiais Protection, 2000, 33(4): 21-22. (in Chinese)
[6]	邹万芳. 激光干式除漆作用机制的分析[J]. 航空精密制造技术, 2010, 46(6): 60-61. ZOU Wanfang. Analysing mechanics of dry laser paint removal[J]. Aviation Precision Manufacturing Technology, 2010, 46(6): 60-61. (in Chinese)
[7]	KELLEY J D, HOVIS F E. A thermal detachment mechanism for particle removal from surfaces by pulsed laser irradiation[J]. Microelectronic Engineering, 1993, 20(1/2): 159-170.
[8]	LU Y F, ZHENG Y W, SONG W D. An energy approach to the modelling of particle removal by pulsed laser irradiation[J]. Applied Physics A: Materials Science & Processing, 1999, 68(5): 569-572.
[9]	LU Y F, SONG W D, LOW T S. Laser cleaning of micro-particles from a solid surface: theory and applications[J]. Materials Chemistry and Physics, 1998, 54(1/3): 181-185.
[10]	邹万芳, 尹真. 短脉宽激光除漆理论清洗模型的建立[J]. 赣南师范学院学报, 2008, 29(6): 27-30. ZOU Wanfang, YIN Zhen. The theoretical cleaning model of paint removal by short pulse laser[J]. Journal of Gannan Normal University, 2008, 29(6): 27-30. (in Chinese)
[11]	田彬. 干式激光清洗的理论模型与实验研究[D]. 天津: 南开大学, 2008. TIAN Bin. Theoretical model and experimental study of dry laser cleaning[D]. Tianjin: Nankai University, 2008. (in Chinese)
[12]	宋峰, 邹万芳, 田彬, 等. 一维热应力模型在调Q短脉冲激光除漆中的应用[J]. 中国激光, 2007, 34(11): 1577-1581. SONG Feng, ZOU Wanfang, TIAN Bin, et al. Model of one-dimensional thermal stress applied in paint removal by Q-switched short pulse laser[J]. Chinese Journal of Lasers, 2007, 34(11): 1577-1581. (in Chinese)
[13]	ZOU W F, XIE Y M, XIAO X, et al. Application of thermal stress model to paint removal by Q-switched Nd: YAG laser[J]. Chinese Physics B, 2014, 23(7): 074205. doi: 10.1088/1674-1056/23/7/074205
[14]	LI X K, ZHANG Q H, ZHOU X Z, et al. The influence of nanosecond laser pulse energy density for paint removal[J]. Optik, 2018, 156: 841-846. doi: 10.1016/j.ijleo.2017.11.010
[15]	LU Y, YANG L J, WANG M L, et al. Simulation of nanosecond laser cleaning the paint based on the thermal stress[J]. Optik, 2021, 227: 165589. doi: 10.1016/j.ijleo.2020.165589
[16]	张鹏, 王如竹. 超流氦传热[M]. 北京: 科学出版社, 2009. ZHANG Peng, WANG Ruzhu. Superfluid Helium Heat Transfer[M]. Beijing: Science Press, 2009. (in Chinese)
[17]	赵颐, 田晓耕. 基于L-S广义热弹性理论YSZ在超短脉冲下的热力响应[J]. 应用数学和力学, 2023, 44(7): 784-796. doi: 10.21656/1000-0887.430134 ZHAO Yi, TIAN Xiaogeng. Thermomechanical responses of YSZ under ultrashort thermal shock based on the L-S generalized thermoelastic theory[J]. Applied Mathematics and Mechanics, 2023, 44(7): 784-796. (in Chinese) doi: 10.21656/1000-0887.430134
[18]	TZOU D Y. Macro- to Microscale Heat Transfer: the Lagging Behavior[M]. 2nd ed. United Kingdom: John Wiley & Sons Ltd, 2015.
[19]	胡汉平, 董艺. 短脉冲激光加热模型的遴选原则[J]. 强激光与粒子束, 2006, 18(10): 1593-1596. HU Hanping, DONG Yi. Model selection criterion for short pulse laser heating[J]. High Power Laser and Particle Beams, 2006, 18(10): 1593-1596. (in Chinese)
[20]	胡汉平. 热传导理论[M]. 合肥: 中国科学技术大学出版社, 2010. HU Hanping. Heat Conduction Theory[M]. Hefei: University of Science and Technology of China Press, 2010. (in Chinese)
[21]	TAM A C, LEUNG W P, ZAPKA W, et al. Laser-cleaning techniques for removal of surface particulates[J]. Journal of Applied Physics, 1992, 71(7): 3515-3523. doi: 10.1063/1.350906
[22]	法西罗夫斯基R A, 凯斯特尔曼V N. 聚合物的粘接作用[M]. 王洪祚, 译. 北京: 化学工业出版社, 2004. VESELOVSKY R A, KESTTELMAN V N. Adhesion of Polymers[M]. WANG Hongzuo, transl. Beijing: Chemical Industry Press, 2004. (in Chinese)
[23]	YANG H, LIU H X, GAO R X, et al. Numerical simulation of paint stripping on CFRP by pulsed laser[J]. Optics & Laser Technology, 2022, 145: 107450.
[24]	WANG P, ZHANG Z, HAO B, et al. Investigation on heat transfer and ablation mechanism of CFRP by different laser scanning directions[J]. Composites Part B: Engineering, 2023, 262: 110827. doi: 10.1016/j.compositesb.2023.110827
[25]	赵安安, 张鸿帅, 燕国强, 等. 铝合金化铣保护胶激光刻型热应力耦合分析[J]. 激光技术, 2023, 47(3): 419-424. ZHAO An'an, ZHANG Hongshuai, YAN Guoqiang, et al. Thermal stress coupling analysis on laser engraving of aluminum alloys with protective coatings for chemical milling[J]. Laser Technology, 2023, 47(3): 419-424. (in Chinese)